BASOO BS-200BL 3-inch Gas / Gasoline Water Pump
3-inch inlet · 6.5 hp 160G engine. BASOO BS-200BL with 100 L/min maximum flow and 30 m maximum head for a correctly matched water-transfer installation.
Product Description
Engine-powered water transfer
The BASOO BS-200BL combines a 3-inch inlet with a 6.5 hp 160G engine for water-transfer planning beyond a fixed electrical supply. The listed maximum flow of 100 L/min and maximum head of 30 m provide clear reference points for comparing models. The gas / gasoline configuration gives buyers a fuel-system choice to discuss with BASOO; confirm the supported gas and performance on each fuel.
Product highlights
- 3-inch inlet: 80 mm inlet specification for matching the suction hose and fittings.
- 6.5 hp engine: 160G power unit with a specified operating speed of 3,600 rpm.
- Flow and head clearly stated: maximum flow 100 L/min; maximum head 30 m. These are separate limits, not a combined operating point.
- Suction lift: listed at 8 m; keep the suction line short and account for site conditions.
Technical specifications
| Product model | BS-200BL |
|---|---|
| Fuel | Gas / gasoline |
| Engine model | 160G |
| Engine rated output | 6.5 hp |
| Specified speed | 3,600 rpm |
| Inlet size | 80 mm (3-inch nominal) |
| Maximum flow | 100 L/min |
| Maximum head (lift) | 30 m |
| Maximum suction lift | 8 m |
Weight and packaging
| Net weight | 28 kg |
|---|---|
| Gross weight | 29 kg |
| Carton dimensions | 515 × 390 × 415 mm |
Choosing the right setup
Consider this pump for irrigation supply, tank filling and general outdoor water transfer where the specified duty matches the installation. Account for suction height, delivery height, hose length and friction losses. Confirm the permitted liquid quality and solids size before using it for drainage or water containing debris.
Common questions
Will it deliver maximum flow at maximum head?
No. Maximum flow and maximum head describe different operating points. Actual delivery depends on total head and pipe losses; request the pump’s performance curve for the flow at your required head.
What should I check before ordering?
Confirm inlet and outlet fitting details, liquid compatibility, suction conditions, included hoses and accessories, and the engine starting arrangement. Confirm the supported gas, regulator requirements and output on each fuel.
Request a quotation
Send model BS-200BL, your quantity, destination market and application details to BASOO. Include the required flow, delivery height and hose arrangement so the supplied configuration can be checked.
Request a quotation or technical details · Browse water pumps
Additional Information
| Product model | BS-200BL |
|---|---|
| Fuel | Gas / gasoline |
| Engine model | 160G |
| Engine rated output | 6.5 hp |
| Specified speed | 3,600 rpm |
| Inlet size | 80 mm (3-inch nominal) |
| Maximum flow | 100 L/min |
| Maximum head (lift) | 30 m |
| Maximum suction lift | 8 m |
| Net weight | 28 kg |
| Gross weight | 29 kg |
| Carton dimensions | 515 × 390 × 415 mm |
